Builder Lists Layout, Lighting And Surface Checks For Pickleball Courts
- Court builder Jeff McClure of Fast-Dry Courts says conversions and new builds need a check of layout, drainage, fencing, lighting and surface, per The Pickleball Weekly.
- His rule of thumb is to plan for resurfacing every four to five years, with the real interval set by usage, exposure, the surface system and maintenance.
- Backyard courts start with space, setbacks, drainage and neighbors; indoor conversions start with columns, ceilings and the slab.
Layout, Lighting And Surface Decide How A Pickleball Court Plays And Lasts
Pickleball court construction has changed size for Jeff McClure of Fast-Dry Courts. “Five years ago, a customer might ask whether they should add a few pickleball courts,” McClure says. Today the talk is about how many courts a customer needs, whether to cover them and how to leave room to grow. McClure, recently promoted to Vice President of Sales at the company, has spent more than 15 years in the industry: the first seven in field construction, the last eight in sales and management. In 2026 he won the Golden Pickle Business Award in Palm Beach.
Fast-Dry Courts began adding pickleball around 2017 and 2018. Demand gained momentum through and after COVID, and requests for a few courts grew into larger, dedicated facilities. The company’s tennis background gave it a strong foundation, McClure says, and it also saw that pickleball has its own needs in layout, fencing, lighting and the overall player experience.
Patch Reef Paddle Club is one example. The club opened its first six pickleball courts in 2001 by converting two of its 21 tennis courts. It added six more by 2004, and just over a year ago it expanded again with 18 covered courts. Patch Reef and Boca West are two of the country club conversions McClure has worked on.
Two disclosures apply. McClure speaks for a court builder and supplier, so every recommendation below comes from a company that sells these services. And the chairman of the World Pickleball Conference, which has hosted McClure on panels for the past five years, plays at Patch Reef. Read the checklist with both facts in mind.
Conversions Start With Usage, Not Lines
Conversions gave many clubs and municipalities a practical way to introduce pickleball on space they already owned. As participation rose, more owners asked for dedicated facilities built from the ground up. McClure tells customers to look at actual usage and long-term needs before they remove a single tennis court. The goal is to add pickleball while protecting the tennis programs that members or residents still enjoy.
The second warning is about geometry. “An existing tennis court footprint also doesn’t automatically make a good pickleball layout.” Safe spacing, access, drainage and fencing each need a check. Fitting the lines is only one part of building a court that works.
The numbers show why. A pickleball court is 20 feet by 44 feet, and the rulebook sets the minimum playing surface at 30 feet by 60 feet, which leaves 5 feet beyond each sideline and 8 feet beyond each baseline. For new construction and tournaments the recommendation grows to 34 feet by 64 feet. The pickleball court dimensions are the first figures to put on any plan, and the lines are only the start of the space a court needs.
Indoor Buildings Hide Their Limits
Outdoors, weather, drainage and site conditions drive the project. Indoors, when an owner converts an existing building, the challenge is making the building suitable for the sport. McClure lists the checkpoints: column locations, ceiling clearance, lighting, air conditioning and acoustics all change the experience. The existing concrete slab needs a careful review for moisture, cracks, joints and compatibility with the proposed surface.
“A warehouse can look like the perfect space until you start laying out the courts and evaluating those details,” McClure says. His fix is timing. Bring in an experienced court builder early, so the limits show up before anyone signs a lease or commits to a layout.
Players feel those limits in the rules. Ceilings, walls and lighting fixtures count as permanent objects, and a served ball that touches one before it lands is a fault against the server. Our guide to indoor pickleball covers the room each court needs and what indoor time costs: $3 to $10 a drop-in session at municipal gyms and $36 to $99 an hour at private clubs, as of November 1, 2026.
Covered Courts Add Playing Hours And Engineering
McClure sees covered courts becoming a bigger part of the conversation, especially in Florida. He points to Patch Reef and Boca West as examples of how much thought now goes into player comfort and the hours a facility can be used. Shade makes a tremendous difference in the heat, he says, and a properly designed cover can cut some weather interruptions.
A roof adds work, though. The design has to handle wind-driven rain, drainage, ventilation, lighting and the structure itself. For a club or a city, McClure says, the value goes beyond an impressive amenity: it is about more usable courts and a better experience throughout the year.
Owners are thinking bigger about the whole site. Fast-Dry Courts sees more interest in complete facilities with seating, shade, lighting and gathering areas considered from the beginning. Tennis stays an important part of the company’s business in Florida, and it continues to build and renovate tennis facilities alongside the pickleball work.
Lighting, Backdrops And Windscreens Make Or Break The Experience
A player can love a court’s surface and still leave annoyed. “A court can have a beautiful surface and still be frustrating to play on if the lighting is uneven or the ball disappears against the background.” McClure’s team reviews lighting placement, glare and uniformity, along with fencing, windscreens and the sightlines around the court.
Indoors, wall colors and windows can be just as important. Outdoors, orientation and surroundings need attention early in the design. USA Pickleball says outdoor courts should run north to south, so players avoid looking straight into the sun in morning or late-afternoon play, which it calls a common safety hazard.
McClure says his years in the field taught him how closely lighting, fencing, windscreens and surroundings connect.
Permits, Wind Loads And Certified Builders
McClure encourages customers to involve a builder certified by the American Sports Builders Association (ASBA) from the beginning. Fast-Dry Courts says that after it acquired Welch Tennis last year, it became the only ASBA Certified Court Builder in Florida, bringing both certification holders under one roof. Both companies have been in business for more than 40 years.
Fast-Dry Courts is also a licensed general contractor, and McClure cites the ASBA motto “Build it Right!” In practice, he says, that means pulling the required permits and building to applicable codes, with proper structural engineering for fencing, light poles and padel systems. The extreme wind loads of the southeastern United States, especially Florida, can require substantially larger foundations than standard installations elsewhere. Those details belong in design and permitting.
Backyard Courts Need Room Beyond The Lines
Private residential courts sit beside Fast-Dry Courts’ club, community and municipal work. With the growth of pickleball and padel, the smaller footprint compared with tennis has made a backyard court more realistic for many homeowners, McClure says. People want to share the sport with family and friends at home.
Every residential project, he says, starts with a plain discussion of available space, setbacks, drainage, lighting and proximity to neighbors. Noise belongs on that list early. On layout, he says having enough room for the playing lines does not necessarily mean there is enough room for a safe court. McClure prefers to explain those limits up front rather than see a homeowner pay for a court they will not enjoy.
Surface, Cushioning And Color
For players concerned about comfort, McClure recommends discussing a properly designed cushioned court system. The options do not all perform the same way, so Fast-Dry Courts walks customers through differences in cushioning, maintenance and cost while keeping ball response and traction consistent.
The right system also varies with the site: geographic location, climate, underlying soil, whether the base is concrete or asphalt, and whether the court is indoors or outdoors. A system that suits one project can be the wrong choice for the next. McClure is careful about the promise. “I wouldn’t promise that a surface will eliminate joint pain, but cushioning is an important option to evaluate.”
Color is a playing decision. Blues and other darker colors can give good contrast with a yellow ball, along with clearly visible white lines. Background and lighting count too. Fast-Dry Courts offers a Color Selector Tool that lets customers preview combinations as a starting point. McClure says the final scheme should appeal to spectators walking in and also serve the people playing on it.
Resurfacing Is Not Replacing
McClure starts with a distinction between resurfacing a court and replacing or reconstructing it. “A worn acrylic surface doesn’t necessarily mean the court underneath has reached the end of its useful life.”
His rule of thumb is to plan for resurfacing every four to five years. The real interval varies with usage, exposure, the surface system and maintenance. A busy municipal facility or country club faces different demands than a private residence or an HOA, and busy indoor courts still wear, even without Florida’s sun and rain.
His upkeep list is short:
- Clean the court on a routine schedule.
- Keep the drains clear.
- Address cracks, standing water and changes in traction quickly.
- Follow the surface manufacturer’s maintenance instructions.
- Have a qualified contractor evaluate any developing problem.
Waiting until a court becomes a safety concern usually makes repairs more disruptive and more expensive, McClure says. Cracks, standing water and changes in traction are the three problems he says to address quickly.
Padel, TYPTI And The Mixed-Sport Facility
McClure sees opportunity in a broader range of racquet sports, and padel is part of that conversation. TYPTI is interesting to him as it uses a pickleball-sized court, which lets an owner add another activity inside an existing facility. Over the next three to five years he expects more owners to weigh a mix of sports and social amenities, with the right combination set by members, customers, available space and operating plans.
Ted Angelo, the licensed contractor behind The Hub, favors large court counts, saying venues with four to six courts struggle with turnover and social atmosphere.
McClure also describes Fast-Dry Courts as a long-term partner. The company starts with design and construction, supports customers through maintenance and resurfacing, and helps with reconstruction when a court reaches the end of its useful life. Its sister company, 10-S Tennis Supply, which also houses the Dinkshot brand, is a national supply company providing products and equipment to operate and maintain courts. Those are the company’s own services and products.
What To Check Before You Commit
Before a club board votes, a city signs a lease or a homeowner hires a crew, run the list. Check actual usage before removing tennis courts. Measure the full playing surface, and not just the lines. Inspect the slab, ceiling and columns of any building. Plan the cover for rain, wind and ventilation. Test the lighting and the background against a yellow ball. Choose a surface for the site and the budget, and expect to resurface every four to five years.
Confirm the builder’s permits, certifications and maintenance support. Separate resurfacing from replacement: a worn acrylic surface does not mean the court underneath is finished.